EverPass is introducing a new Onscreen Guide to enhance your navigation experience. This guide will be accessible via your remote, allowing you to toggle seamlessly between live events and marketing content.
1. Make sure your Chromebox remote is ON
2. Make sure the USB is plugged into the receiver and that the remote is fully charged
3. Tap any button on the remote and the guide will populate
4. Use the arrows to navigate between live events and your marketing channel
5. Hitting OK will select the event and/or marketing channel; the guide will automatically disappear and the content will load.
To change the WiFi network: Reboot the device and the chrome page will appear. Press ctrl alt + S on the remote keyboard to go to the device's setting. From there, you can choose your WiFi network. Upon completion, reboot the device again.
Please note:
- Guide will automatically time out after 10 seconds of inactivity.
- If the Terms and Conditions have not been accepted for an event, it will not show up on the guide. You will need to accept it in the EverPass Manager, and then the event will populate.
- If no live events are happening at the time, the empty state will populate.
Comments
0 comments
Article is closed for comments.